Product ID:OLV DRAB PRESERVATIVE COATING 24087,G-5748
MSDS Date:05/19/1989
FSC:8030
NIIN:00-656-1030
MSDS Number: BHDRT

AKRON PAINT AND VARNISH, INC.

1390 FIRESTONE PARKWAY
AKRON, OH 44301
US

Emergency Phone: 216-773-8911

Info Phone: 216-773-8911

Cage: 70228

MILES MARTIN LABORATORIES SAE

MADRID, OH 28008 SP

Telephone: 216-773-8911

Cage: 7022B

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 35-40%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 25-30%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5-10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Effects of Overexposure:EYE: IRRITATING
SKIN: IRRITATING
INHAL: NAUSEA, HEADACHE
& LOSS OF CONSCI OUSNESS, NARCOSSIS & IRRITATION TO RESPIRATORY
SYSTEM.

First Aid:EYE: FLUSH PROMPTLY & THOROUGHLY WITH WATER, OBTAIN MEDICAL
ATTENTION SKIN: WASH CAREFULLY WITH SOAP AND WATER.
INHAL: REMOVE INDIVIDUAL TO FRESH
AIR, & USE OXYGEN IF NECESSARY OBTAIN MEDICALATTENTION

Flash Point:24F/-4.44C
Upper Limits:1.0
Extinguishing Media:CARBON DIOXIDE, FOAM OR DRY CHEMICAL
Fire Fighting Procedures:WATER SPRAY TO COOL CONTAINERS. WEAR SELF
CONTAINED BREATHING APPARATUS & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:HEAT MAY CAUSE DISRUPTIVE PRESSURE OF
CONTAINERS. THERMAL DECOMPOSITION CAN PRODUCE TOXIC FUMES.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. DAM UP TO
LIMIT SPREADING. ABSORB ON INERT MATERIAL VENTILATE AREA

Handling and Storage Precautions:DO NOT DROP CONTAINERS. AVOID
HEAT,SPARKS, & OPEN FLAME. STORE AT ROOM TEMPERATURE WITH GOOD
VENTILATION.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED INHALATION &
BODY CONTACT. GROUND CONTNRWHILE POURING. DO NOT INHALE FUMES WHILE
WELDING.

Respiratory Protection:USE APPROPRIATE NIOSH APPROVED RESPIRATOR WHEN
SPRAYING OR APPLYING IN CONFINED AREAS.
Ventilation:PROVIDE ADEQUATE VENTILATION TO ALLEVIATE VAPOR CONCENTRATN
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SAFETY GOGGLES W/SIDESHIELD OR FACESHLD
Other Protective Equipment:NORMAL PROTECTIVE CLOTHING
Supplemental Safety and Health
NK

Boiling Pt:B.P. Text:175-279F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:87.87

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Hazardous Decomposition Products:COMBUSTION IN RESTRICTED ENVIRONMENT
CAN PRODUCE CARBON MONOXIDE AND TOXIC FUMES.
Conditions to Avoid Polymerization:STORAGE OF WETTED COMBUSTIBLE MATL
MAY CAUSE SPONTANEOUS COMBUSTION.

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/APPLICABLE POLLUTION
CONTROL REGULATIONS. DO NOT INCINERATE CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.